Gateway How Tos
How to: MGS/AWG Gateway - Setting up ZeroTier (snmp on a switch)
1. Network diagram (as an example setup) 2. Configuring SNMP on ICCN WX7028-410G Switch Log in as admin to the switch web interface, make sure it is in the same subnet of the local network behind the ICCN AWG Gateway. For instance, if LAN IP of ...
How to: MGS/AWG - Setting up a Routed IPSec Tunnel
Contents 1.0 Setup a routed IPSec Tunnel 3 1.1 Before you start 3 1.2 Sample Setup. 3 1.3 Firewall Rules Site A & Site B (part 1) 6 2.0 Step 1 - Phase 1 Site A. 6 2.1 General information. 6 2.2 Phase 1 proposal (Authentication) 6 2.3 Phase 1 proposal ...
How to: MGS/AWG - Inline Intrusion Prevention System
Contents 1.0 Inline Intrusion Prevention System... 1 1.1 General setup. 2 1.2 Advanced options. 3 1.3 Finger Printing. 4 2.0 Rulesets. 4 2.1 Emerging Threats ETOpen Ruleset 4 2.2 Abuse.ch. 4 2.3 SSL Blacklist 5 2.4 Feodo Tracker 5 2.5 URLHaus List 5 ...
How to: MGS/AWG - Setting up DNSmasq DNS
1. Dnsmasq DNS Dnsmasq is a lightweight, easy-to-configure DNS forwarder that can be used to answer DNS queries from your network. Similar functionality is also provided by “Unbound DNS”, our standard-enabled forward/resolver service. Sometimes, ...
How to: MGS/AWG - Setting up DHCP
DHCP DHCP automatically provides clients with an IP address (instead of clients having to set one themselves). DHCP is available for both IPv4 and IPv6 clients, referred to as DHCPv4 and DHCPv6, respectively. Settings Overview DHCPv4 settings can be ...
How to: MGS/AWG - Setup Captive Portal
Contents 1. Captive portal & GuestNET. 2 1.1 Typical Applications. 2 1.2 Template Management 2 1.3 Zone Management 3 1.4 Authentication. 3 1.5 Voucher Manager 3 1.6 Timeouts & Welcome Back. 3 1.7 Bandwidth Management 4 1.8 Portal bypass. 4 1.9 Real ...
How to: MGS/AWG - Port Forwarding
Contents 1.0 Introduction to NAT. 2 1.1 Some terms explained. 2 2.0 Port Forwarding: 3 2.1 Full Network Diagram (as per our setup) 3 2.2 Steps to configure port forwarding settings: 4 2.3 Destination port range and redirect target IP.. 5 2.4 Step To ...
How to: MGS/AWG SSL VPN - Site-to-Site Tunnel
Contents 1.0 Setup SSL VPN site-to-site tunnel 2 Before you start 2 Sample Setup. 2 Site A - Server 3 Site B - Client 3 Full Network Diagram Including SSL VPN Tunnel 4 2.0 Step 1 - Add SSL Server. 5 3.0 Step 2 - Copy Shared Key. 6 4.0 Step 3 - Server ...
How to: MGS/AWG set up for Open VPN - SSL VPN Road Warrior
Open VPN - SSL VPN Road Warrior - Table of Contents 1. OpenVPN - Setup SSL VPN Road Warrior. 2 1.1 Step 0 - Preparation. 4 1.1.1 Configure TOTP server 4 1.1.2 Add Certificate Authority. 4 1.1.3 Create a Certificate. 5 1.2 Adding a User. 6 2.0 Step 1 ...
How to: Setting up Monit natively on the MGS/AWG Gateway
MGS/AWG - Monit Package Monit plugin is a Unix system management and proactive monitoring tool. This document will help guide set up the Monit tool on the ICCN AWG gateway. This Monit package is included in the AWG system by default. Monit is a ...
How to - Setup a routed IPSec Tunnel for MGS/AWG Gateway/Firewall
1.0 Setup a routed IPSec Tunnel Most Site-to-Site VPNs are policy-based, which means you define a local and a remote network (or group of networks). Only traffic matching the defined policy is pushed into the VPN tunnel. As the demands for more ...