MGS/AWG Gateway - Enabling VLANs on an Interface

MGS/AWG Gateway - Enabling VLANs on an Interface


    • Related Articles

    • How to: MGS/AWG Gateway - Setting up ZeroTier (snmp on a switch)

      1. Network diagram (as an example setup) 2. Configuring SNMP on ICCN WX7028-410G Switch Log in as admin to the switch web interface, make sure it is in the same subnet of the local network behind the ICCN AWG Gateway. For instance, if LAN IP of ...
    • MGS/AWG Gateway - How to create a VLAN

    • How to: WX7028-410G VLAN & Port Configuration

      Contents VLAN & Port Configuration 2 1. Introduction 2 2. VLAN Creation and Configuration in web GUI 2 2.1 Creating a VLAN 2 2.2 VLAN IP Configuration 2 2.3 Assigning Ports to new VLAN (Access Ports) 3 3. VLAN Creation and Configuration in CLI 3 4. ...
    • How To: WX7052 VLAN & Port Configuration

      WX7052-410G: VLAN & Port Configuration 1. Introduction VLAN or Virtual LAN is a sub network which separates an existing physical network into multiple logical networks. Thus, each VLAN creates its own broadcast domain. They work as though they are ...
    • Quick Start Guide - MGS/AWG Gateway/Firewall

      Intended audience This guide is designed to be used by network managers, IT administrators, and technicians who are responsible for installing, networking equipment in enterprise and service provider environments. Knowledge of telecommunication and ...